Pro-Peller Reflector Unit

Please note that the effectiveness of the Pro-Peller unit can only be guaranteed if the placement locations and unit quantities are determined by an accredited Eagle Eye representative. Feel free to contact us for any assistance.

Eagle Eye Bird Control is proud to introduce the “Pro-Peller” reflective bird deterring unit.

The Pro-Peller was designed to provide a durable, yet cost effective, reflective unit used to complement the Eagle Eye system.

The unit rotates by means of it’s double bearing system and the wings have been designed to rotate in the slightest of breezes.

The unit is totally wind-driven and no electricity is needed. This ensures a low cost, low maintenance and easy to install open-area bird deterring device.

The wings are made out of abs plastic and the mounting bracket is a strong glass filled nylon. 
This ensures longevity of the unit and it can be used in coastal areas without the risk of corrosion.

The Pro-Peller unit carries a 2-year guarantee. 

The Pro-Peller unit comes in two colour variants:


One Pro-Peller unit has an effective radius of 15m (50ft).
Place one unit every 30m (100ft) in large open areas.
Always place the units in direct sunlight and in areas with a light breeze.

The Pro-Peller unit is intended to be used in conjunction with the Eagle Eye system.
Place the Eagle Eye units on the highest points of the building and near the problem areas. Then place one Pro-Peller every 30m (100ft) between the Eagle Eye units.

Installation instructions:
1) Insert the aluminium pipe into the mounting bracket.
2) Then insert the top of the aluminium pipe into the bearing housing.
3) Insert self-drilling screws into the mounting bracket as well as the bearing housing to
    keep the aluminium pipe in place.
4) Use the four supplied screws to fasten the Pro-Peller unit to a concrete surface or use four pop rivets (4.8mmx10mm) on metal surfaces (not supplied).

Additional Info

  • Product Maintenance:
    Maintenance is needed every 6 months.
    The Pro-Peller unit is covered with a metalized coating and will get dirty. It is recommended that the unit must be cleaned with a glass/window cleaning soap every 4-6 months in normal conditions, and every 3 to 4 months near the coast or where there is a deposit of smoke or acid is in the air.
    If the Pro-Peller unit is standing still or is dirty, the "System" will not work.
Read 13032 times